The best selling masonry saw in the USA
OSHA CompliantCut Tile Indoors.
No Water.
No Dust. No Mess.
The iQ252 is the professional tile saw that captures 99.5% of silica dust, letting you cut porcelain, ceramic, marble, and stone right inside the home, without water, slurry, or tarps.
Built Different. Built to Perform.
Hitches Up. Rolls In. Ready to Cut.
Tow it to the job, wheel it in, and start cutting in minutes. Built for pros who move fast and don't have time to babysit water lines or slurry.
Engineered Dust Capture, Not an Afterthought
The integrated iQ blade guard channels dust straight into the vacuum, capturing 99.5% of harmful silica dust before it ever hits the air.
Long Rips. Rock-Solid Rail.
A rigid aluminum rail table gives you 52 inches of true, chatter-free cutting length for large format tile and plank porcelain.
Dialed-In Accuracy, Every Pass
Smooth-gliding carriage and a true-cut fence system deliver clean, straight, repeatable cuts on porcelain, stone, and glass tile.
Traditional Tile Saws Are Holding You Back
Every wet saw you use costs you time, profit, and puts your crew at risk. There's a better way.
Silica Dust Is a Legal Liability
Cutting tile generates silica dust, a known carcinogen. OSHA fines reach $16,131 per violation. Wet saws slow you down and still don't fully comply.
Wet Saws = Hours of Cleanup
Water hoses, slurry on the floor, stained grout lines, and ruined finishes. Your crew spends 30–45 minutes every day just cleaning up after cuts.
Can't Cut Inside the Home
Traditional wet saws are banned indoors. That means extra trips, staging areas outside, and carrying heavy tile back and forth, wasting time and labor.
Large Format Tile Is a Nightmare
Most saws can't handle 24"×48" large format tiles in a single pass. Multiple repositions and cuts add hours to an already long day.
"We were dragging hoses from the parking lot to the 3rd floor every job. Half our day was setup and cleanup, not tile work."
— Tile Contractor, Florida
Built for Tile Pros.
Designed for the Jobsite.
The iQ252 isn't just an upgrade. It's a completely different way to cut tile. Faster, cleaner, safer.
Zero Water. Zero Slurry.
No water hoses, no slurry cleanup, no staining the homeowner's floors. Just clean dry cuts every single time.
99.5% Dust Captured
Three-stage Quick-Spin® filtration with iQ Dura Bond cartridge captures virtually all silica dust at the source. OSHA compliant out of the box.
Work Inside the Home
Unlike any wet saw, the iQ252 can run right inside the bathroom, kitchen, or living room. No tarps, no mess, no angry homeowners.
Empty Just Once a Day
The 11 lb dust chamber holds over 500 linear feet of cuts at 3/8" thick tile, so you focus on work, not maintenance.
Built-In Stand & Wheels
Roll it anywhere on the jobsite. No separate stand to carry or assemble. Full working height with integrated wheels for mobility.
Q-Drive™ Cool Cut Blade
Proprietary blade technology keeps the blade cool under load, delivering clean precise edges on porcelain, ceramic, marble, travertine, and natural stone.
Cut tile inside the home. No water. No mess.
No hoses to drag. No slurry to scrub. No OSHA violations. Just clean, precise tile cuts all day.
iQ252 vs. Traditional Wet Tile Saw
On a typical bathroom remodel, the iQ252 saves you over 2 hours of setup and cleanup, and lets you work inside from day one.
See the iQ252 in Action
Watch real tile pros use the iQ252 on actual jobs — kitchens, bathrooms, commercial floors, and more.
iQ252 10" Bridge Saw — World's First Dustless Tile Saw
See how the iQ252 captures 99.5% of silica dust while delivering precision cuts on porcelain, ceramic, and stone.
iQ252 Dry Cut Bridge Saw — Precision Cutting Without Water
Watch the iQ252 bridge saw deliver precision cuts on porcelain and large format tile with zero water and no slurry.
Unboxing and Setting Up the iQ252 Rail Saw
A complete setup walkthrough of the iQ252 10" dry cut rail saw — ready to cut right out of the box.
iQ252 Specifications
Everything you need to know before you buy. Built for serious tile professionals.
10" Diamond Blades for Every Material
Choose the right blade for your job. Each iQ blade is engineered for optimal dust collection and cutting performance.
Q-Drive Plus-Tile Blade Dry Diamond - Finishing Touch
10" x .060
SKU: TLD250-1.4P-QD-NX
Premium continuous rim blade for chip-free cuts on porcelain and ceramic tile.
Q-Drive Plus Tile Blade Dry Platinum - Hard Material
10" x .060
SKU: TLD10-060P-QD-HARDMAT
Premium continuous rim blade for chip-free cuts on hard materials and engineered stone.
Q-Drive Plus-Tile Blade Dry Marble
10" x .060
SKU: TLD10-060P-QD-MB1
Premium continuous rim blade for chip-free cuts on marble and natural stone.
Q-Drive Turbo Cutter Blade Dry - Hard Material 2
10" x .080
SKU: TLD10-080P-QD-HM2
Fast-cutting turbo rim blade for dense porcelain and hard material applications.
Q-Drive Plus-Tile Blade Dry Platinum - Combo
10" x .060
SKU: TLD10-060P-QD-COMBO
Premium combination blade for versatile cutting across multiple materials.
Blade Comparison
Compare material compatibility, rim type, and specs across all 10" iQ blades.
| Spec / Blade | Q-Drive Plus-Tile
Finishing Touch TLD250-1.4P-QD-NX | Q-Drive Plus-Tile
Hard Material TLD10-060P-QD-HARDMAT | Q-Drive Plus-Tile
Marble TLD10-QD65P-GD-MB1 | Q-Drive Turbo Cutter
Hard Material 2 TLD10-080P-QD-HM2 | Q-Drive Plus-Tile
Combo TLD10-060P-QD-COMBO |
|---|---|---|---|---|---|
| Blade Size | 10" × .060 | 10" × .060 | 10" × .060 | 10" × .080 | 10" × .060 |
| Rim Type | Continuous | Continuous | Continuous | Turbo | Continuous |
| Wet / Dry | Dry | Dry | Dry | Dry | Dry |
| Cut Speed | Slow / Precision | Medium | Medium | Fast | Medium |
| Porcelain | |||||
| Ceramic Tile | |||||
| Marble | |||||
| Hard Material | |||||
| Engineered Stone | |||||
| Multi-Material | |||||
| All blades $103.00 | Shop → | Shop → | Shop → | Shop → | Shop → |
Trusted by Tile Contractors Everywhere
From bathroom remodels to large commercial projects, tile pros rely on the iQ252 every day.
"I've been using the iQ252 for 2 years. It's a game changer for indoor tile work — no water, no mess, and customers are always impressed when they see me cut right inside their home."
Mike R.
Tile Contractor, Texas
"Finally a saw I can use in a kitchen remodel without laying down 40 feet of plastic. The dust collection is incredible. I'll never go back to a wet saw."
James T.
Custom Tile Installer, Florida
"The 52" rip capacity handles our large format 24×48 tiles in a single pass. It's the only saw on the market that can do that dry. Best investment we made this year."
Carlos M.
Remodeling Contractor, California
Ready to Cut Tile Without the Mess?
Get a free quote today. Find an authorized dealer near you. Financing available from $417/mo.
Pros Around the World Choose iQ
Real contractors. Real jobs. Real results.
Get Your Free Quote & Find a Dealer Near You
Fill out the form and our team will connect you with an authorized dealer in your area, plus send you a personalized quote based on your specific needs.